SUB-PERIOSTEAL IMPLANTS IUXTA 3D

THE NEW DIGITAL PROTOCOL FOR JUXTA-OSSEOUS TREATMENT: CUSTOMIZED TITANIUM IMPLANTS, MADE TO MEASURE FOR PATIENTS.

The IUXTA-3D service finally permits to solve cases of extreme atrophy of the upper and lower jaw when the bone is not sufficient for conventional endosseous titanium implants.

IUXTA-3D implants are implantable medical devices made to measure for each individual patient, in compliance with the 93/42/EEC directive and its subsequent modifications and additions.

The structure of the juxta-osseous implant is designed based on the patient’s examination and is customized following the patient’s anatomical features and prosthetic needs. It is made of biocompatible, certified titanium.It is placed during one single surgical session, reducing the waiting time and the patient discomfort, characteristic of conventional bone regeneration techniques.

IUXTA-3D probably represents the most mature and perfected evolution of this technique and makes it possible to obtain previously unthinkable outcomes and applications.

Juxta-osseous implantology is a surgical technique that has featured high failure rates in the past due to unsuitable clinical protocols and limited technological resources. It was progressively abandoned due to scarcely predictable short- and long-term follow-up outcomes. Now, IUXTA-3D revolutionizes this technique and exploits the quality and precision of the most innovative digital methods for the design and production of the implant.

This permits to obtain a veritable “bespoke” solution for patients and improves the predictability of this new surgery.

Download IUXTA 3D Brochure

MAXILLO EDITION

BT SCREW

Superior Screw Technology
SABRE DENTAL’s BT SCREW kit is a simple but complete system
for fixation in MANDIBOLARY MAXILLO surgery provides
surgeons the ease of use they want with the performance they require.

Ideal for fixing mesh (regeneration grids) and membranes, iuxtaosseus implants, bone grafts, plates.

IN A COMPACT KIT

All the necessary tools and a full range of fixing screws to cover most surgical needs.

CHARACTERISTICS

100% DIGITAL WORK FLOW
HIGH DIMENSIONAL ACCURACY
EXCEPTIONAL STABILITY
TITANIUM LASER MELTING
DEDICATED OSTEOSYNTHESIS SCREWS
VERIFIED MECHANICAL STRENGTH

DIGITAL WORKFLOW

CONE BEAM CT AND PRODUCTION OF A 3D VIRTUAL BONE MODEL

The process starts with the acquisition of the patient’s tomographic imaging and of a DICOM file. During the examination, the patient must wear a dedicated radiological guide. The DICOM file is sent by the clinician to the SABRE DENTAL TEAM using the Web. The SABRE DENTAL TEAM checks the feasibility of the case and starts the design phase.

DIGITAL PROCESSING OF THE IUXTA-3D STRUCTURE

IUXTA-3D is virtually modelled on the anatomy of the patient by the SABRE DENTAL specialists, using a dedicated CAD software. The layout of the device is designed to bear the prosthetic load while guaranteeing the best possible follow-up. The final project is shared with the prescribing, who can make changes and who confirms it before production takes place.

TITANIUM LASER MELTING – 3D PRINTING

After receiving the doctor’s prescription, SABRE DENTAL produces the device by means of “Selective Laser Melting” technique. Homogeneous layers of highly pure titanium powder are molten using a laser in a selective way, based on the 3D virtual model. The final object meets high purity and microstructural homogeneity standards that guarantee high mechanical performance, in response both to static and cyclic loading.

CLEANING, DECONTAMINATION, PACKAGING AND SHIPPING

The IUXTA-3D implant is decontaminated in an automatic ultrasonic machine, it is packaged in a cleanroom under controlled atmosphere and delivered ready for sterilization in the clinician’s office. All SABRE DENTAL production cycles are controlled and registered so as to guarantee the traceability of the product, in compliance with the most restrictive standards of reference.

SURGERY AND SURGICAL APPLICATION

The surgery is performed under local anaesthesia or conscious sedation. At the end of surgery, the patient can receive a first provisional that will allow the perfect healing of soft tissues. You can ask SABRE DENTAL to make the provisional at the beginning of the production process.

BIBLIOGRAPHY

Cerea M: Una soluzione alternativa al rialzo di seno. Italian Dental Journal. Anno 6. nr. 3/2001; pp. 5-8.
_ _ _ _ _ _ _ _

Cerea M: Oltre il seno: l’impianto pterigoideo. Giornale dell’Odontoiatra.15/05/2011.n°6; pp. 7-8.
_ _ _ _ _ _ _ _

Cerea M, Olivetti F, Olivetti M: trattamento di grave atrofia mascellare con griglia e pterigo, www.Italian Dental Journal .it. Dental Academy.it
_ _ _ _ _ _ _ _

Virgilio F. Ferrario, Carlo Miani, Alberto Miani: Lineamenti di biomeccanica della masticazione nella pratica gnatologica. Milano: Edi.Ermes, 1988.
_ _ _ _ _ _ _ _

Raghoebar GM: 110th volume of Dutch Journal of Dentistry 4. Application of dental implants during the last decades: from subperiostal to transosteal and endosseus implants. Ned.Tijd- schr.Tandheelked. 2003 Nov;110(11);422-9.
_ _ _ _ _ _ _ _

Weiss CM, Reynolds T: A collective conference on the utilization of subperiostal implants in implant dentistry. J.Oral Implantol.,2000;26(2):127-8.
_ _ _ _ _ _ _ _

E.Lloyd Dubrul. Anatomia orale di Sicher.Edizione Italiana a cura di A.Miani e V.F.ferrario. Milano EdiErmes 1988.
_ _ _ _ _ _ _ _

Schneider D, Marquardt P, Zwahlen M, Jung RE. A systematic review on the accuracy and the clinical outcome of computer-guided template-based implant dentistry. Clin. Oral Impl. Res. 20 (Suppl. 4), 2009; 73–86. doi: 10.1111/j.1600-0501.2009.01788.x
_ _ _ _ _ _ _ _

W. De Vos, J. Casselman, G. R. J. Swennen: Cone-beam computerized tomography (CBCT) imaging of the oral and maxillofacial region: A systematic review of the literature. Int. J. Oral Maxillofac. Surg. 2009; 38: 609–625.
_ _ _ _ _ _ _ _

Rafi, H., Karthik, N., Gong, H., Starr, T.L. and Stucker, B.E. “Microstructures and mechanical properties of Ti-6Al-4V parts fabricated by Selective Laser Melting and Electron Beam Melt- ing”. Journal of Materials Engineering and Performance, 2013, 1-12.
_ _ _ _ _ _ _ _

Vandenbroucke, B. and Kruth, J.P. “Selective Laser Melting of biocompatible metals for Rapid Manufacturing of medical parts”. Rapid Prototyping Journal, 2007, 13.4: 196-203.

COMPLETE SERVICE

SEND US THE DICOM FILE OF THE TOMOGRAPHIC
EXAMINATION OF THE PATIENT

Through our platform the doctor can send the DICOM file via web to our SABRE DENTAL TEAM, which begins the design phase

PERFECT
ANATOMIC
CONFORMATION

REDUCED
DURATION
OF REHABILITATION

TECHNICAL
SUPPORT

DEDICATED
SURGICAL KIT
WITH CORTICAL SCREWS

CONTACT A SPECIALIST

Request a quote

Get advice immediately on products, services or to develop a custom project based on your needs.

Request Info

CONTACT A SPECIALIST

Request a quote

Get advice immediately on products, services or to develop a custom project based on your needs.

Request Info

CONTACT A SPECIALIST

Request a quote

Get advice immediately on products, services or to develop a custom project based on your needs.

Request Info

Address

Sabre Dental Supplies
48 - 52 Penny Lane
Liverpool, L18 1DG
Merseyside,
United Kingdom

Quick Links

Product pages

PROSTHESIS

Phone: +44 (0)7766 233211
Email:[email protected]

Phone:+44 (0)7766 233211
Email:[email protected]

Sign up for Newsletter

SUB-PERIOSTEAL IMPLANTS IUXTA 3D

THE NEW DIGITAL PROTOCOL FOR JUXTA-OSSEOUS TREATMENT: CUSTOMIZED TITANIUM IMPLANTS, MADE TO MEASURE FOR PATIENTS.

MAXILLO EDITION

BT SCREW

CHARACTERISTICS

DIGITAL WORKFLOW

CONE BEAM CT AND PRODUCTION OF A 3D VIRTUAL BONE MODEL

DIGITAL PROCESSING OF THE IUXTA-3D STRUCTURE

TITANIUM LASER MELTING – 3D PRINTING

CLEANING, DECONTAMINATION, PACKAGING AND SHIPPING

SURGERY AND SURGICAL APPLICATION

REPLY OF THE GRAFT

BIBLIOGRAPHY

COMPLETE SERVICE

SEND US THE DICOM FILE OF THE TOMOGRAPHIC
EXAMINATION OF THE PATIENT

CONTACT A SPECIALIST

Request a quote

CONTACT A SPECIALIST

Request a quote

CONTACT A SPECIALIST

Request a quote

Address

Quick Links

Product pages

Follow Us

Follow Us

2024 © Sabre dental supplies

Sign up for Newsletter

SUB-PERIOSTEAL IMPLANTS IUXTA 3D

THE NEW DIGITAL PROTOCOL FOR JUXTA-OSSEOUS TREATMENT: CUSTOMIZED TITANIUM IMPLANTS, MADE TO MEASURE FOR PATIENTS.

MAXILLO EDITION

BT SCREW

CHARACTERISTICS

DIGITAL WORKFLOW

CONE BEAM CT AND PRODUCTION OF A 3D VIRTUAL BONE MODEL

DIGITAL PROCESSING OF THE IUXTA-3D STRUCTURE

TITANIUM LASER MELTING – 3D PRINTING

CLEANING, DECONTAMINATION, PACKAGING AND SHIPPING

SURGERY AND SURGICAL APPLICATION

REPLY OF THE GRAFT

BIBLIOGRAPHY

COMPLETE SERVICE

SEND US THE DICOM FILE OF THE TOMOGRAPHIC EXAMINATION OF THE PATIENT

CONTACT A SPECIALIST

Request a quote

CONTACT A SPECIALIST

Request a quote

CONTACT A SPECIALIST

Request a quote

Address

Quick Links

Product pages

Follow Us

Follow Us

2024 © Sabre dental supplies

Login

SEND US THE DICOM FILE OF THE TOMOGRAPHIC
EXAMINATION OF THE PATIENT